General Linux Commands (8)

mfixnan.1
mfixnan(1): - Replace a particular set of values in a FITS image with NaNs (or
mfixnan(1): Converts NaNs found in the image to some other value (given by the user), or converts a range of supplied values into NaNs. mFixNaN [-d level] [-v NaN-value] in.fits out.

netfilter-persistent.8
netfilter-persistent(8): - load, flush and save netfilter rule sets
netfilter-persistent(8): netfilter-persistent uses a set of plugins to load, flush and save netfilter rules at boot and halt time. Plugins can be written in any suitable language and stored in /usr/share/netfilter- persistent/plugins.

mailutil.1
mailutil(1): - mail utility program - (Ubuntu Linux)
mailutil(1): mailutil replaces the old chkmail, imapcopy, imapmove, imapxfer, mbxcopy, mbxcreat, and mbxcvt programs. mailutil check determines whether new mail exists in the given mailbox (the default is INBOX).

getorf.1e
getorf(1e): - Finds and extracts open reading frames (ORFs)
getorf(1e): getorf is a command line program from EMBOSS ("the European Molecular Biology Open Software Suite"). It is part of the "Nucleic:Gene finding" command group(s).

cueprint.1
cueprint(1): - report disc and track information from a CUE or TOC file
cueprint(1): cueprint reports disc and track information from CUE and TOC files, which are typically created by compact disc ripping software. By default, cueprint reports a default set of disc information, and a default set of information for each

probalign.1
probalign(1): - Align sequences in MFAFILE(s) and print result to standard output
probalign(1): PROBALIGN Version 1.4 (Nov 2010) aligns multiple protein sequences and prints to the standard output. Written by Satish Chikkagoudar and Usman Roshan using code from PROBCONS version 1.

mgt.6
mgt(6): - game record display/editor for the oriental game of go
mgt(6): Go is an ancient oriental strategy game based on the capturing of territory. The players alternate putting stones on the board, trying to surround as many empty intersections as possible.

od2trips.1
od2trips(1): - Importer of O/D-matrices for the road traffic simulation SUMO
od2trips(1): SUMO od2trips Version 0.27.1 Copyright (C) 2001-2016 DLR and contributors; http://sumo.dlr.de Importer of O/D-matrices for the road traffic simulation SUMO. Configuration Options: -c, --configuration-file FILE Loads the named config on

eurephia-auth.7
eurephia-auth(7): - The eurephia OpenVPN authentication plug-in
eurephia-auth(7): The eurephia-auth.so is a plug-in for OpenVPN. It is loaded by providing the --plugin option in the OpenVPN configuration. The syntax for OpenVPN and eurephia-auth is: plugin eurephia-auth.

ec2msnapatt.1
ec2msnapatt(1): - Modify a snapshot attribute (Ubuntu)
ec2msnapatt(1): Modify an attribute on a snapshot. The SNAPSHOT parameter is the ID of the snapshot for which to modify an attribute. GENERAL http://docs.amazonwebservices.com/AWSEC2/2014-05-01/CommandLineReference http://docs.amazonwebservices.

mido-ports.1
mido-ports(1): - lists available ports for mido (Ubuntu)
mido-ports(1): This manual page documents briefly the mido-ports command. Lists available input and output ports and shows environment variables and the current backend module.

cdclose.1
cdclose(1): - play and catalog audio CDROMs on CDROM drive(s)
cdclose(1): The cdeject command ejects the current compact disc. The cdclose command closes the CDROM tray. The cdir command lists information about the currently loaded audio compact disc. In particular, it lists the lengths of all tracks.

gqfasi.3ncarg
gqfasi(3ncarg): - retrieves the current value of the fill area style index.
gqfasi(3ncarg): ERRIND (Integer, Output) - If the inquired value cannot be returned correctly, a non-zero error indicator is returned in ERRIND, otherwise a zero is returned. Consult "User's Guide for NCAR GKS-0A Graphics" for a description of the meaning

hsvrgb.3ncarg
hsvrgb(3ncarg): - Converts a color specification given in the Hue, Saturation, and
hsvrgb(3ncarg): The C-binding argument descriptions are the same as the FORTRAN argument descriptions. Online: colconv, hlsrgb, rgbhls, rgbhsv, rgbyiq, yiqrgb, ncarg_cbind. Hardcopy: NCAR Graphics Fundamentals, UNIX Version COPYRIGHT Copyright (C)

kakasi-config.1
kakasi-config(1): - script to get information about the installed version of KAKASI
kakasi-config(1): kakasi-config is a tool that is used to configure to determine the compiler and linker flags that should be used to compile and link programs that use KAKASI. It is also used internally to the .

prompter.1mh
prompter(1mh): - prompting editor front-end for nmh
prompter(1mh): Prompter is an editor front-end for nmh which allows rapid composition of messages. This program is not normally invoked directly by users but takes the place of an editor and acts as an editor front-end.

reapr-perfectfrombam.1
reapr-perfectfrombam(1): - generate perfect mapping plots from a bam file
reapr-perfectfrombam(1): Alternative to using perfectmap, for large genomes. Takes a BAM, which must have AS:... tags in each line. Makes file of perfect mapping depth, for use with the REAPR pipeline.

ec2-associate-route-table.1
ec2-associate-route-table(1): - Associate a route table with a subnet
ec2-associate-route-table(1): Associate a route table with a subnet. ROUTE_TABLE is the route table that you wish to associate. GENERAL http://docs.amazonwebservices.com/AWSEC2/2014-05-01/CommandLineReference http://docs.amazonwebservices.

xmtextfieldsetstring.3
xmtextfieldsetstring(3): XmTextFieldSetString --- A TextField function that sets the
xmtextfieldsetstring(3): XmTextFieldSetString sets the string value of the TextField widget. This routine calls the widget's XmNvalueChangedCallback and verification callbacks, either XmNmodifyVerifyCallback or XmNmodifyVerifyCallbackWcs, or both.

i.ortho.rectify.1grass
i.ortho.rectify(1grass): - Orthorectifies an image by using the image to photo
i.ortho.rectify(1grass): i.photo.rectify rectifies an image by using the image to photo coordinate transformation matrix created by i.photo.2image and the rectification parameters created by i.photo.2target.

endpwent.3posix
endpwent(3posix): endpwent, getpwent, setpwent --- user database functions
endpwent(3posix): These functions shall retrieve information about users. The getpwent() function shall return a pointer to a structure containing the broken-out fields of an entry in the user database.

grun.1x
grun(1x): - X/GTK based application launcher. (Ubuntu)
grun(1x): gRun launches applications in X Windows without the need for an xterm session at all. gRun provides three methods of launching applications, entering the command directly into the text field, browsing the tree for the application and

vistaioattribute.3
vistaioattribute(3): - representation of a list of name/value pairs
vistaioattribute(3): Introduction An attribute associates a value with a name. Generally, various properties of an object such as an image are described by attributes, each naming one property and specifying that property's associated value.

atktopbm.1
atktopbm(1): - convert Andrew Toolkit raster object to portable bitmap
atktopbm(1): Reads an Andrew Toolkit raster object as input. Produces a portable bitmap as output. pbmtoatk(1), pbm(5) atktopbm [atkfile] Copyright (C) 1991 by Bill Janssen.

syncthing-rest-api.7
syncthing-rest-api(7): - REST API (Ubuntu Linux Manual)
syncthing-rest-api(7): Syncthing exposes a REST interface over HTTP on the GUI port. This is used by the GUI code (JavaScript) and can be used by other processes wishing to control Syncthing. In most cases both the input and output data is in JSON format.

lvchange.8
lvchange(8): lvchange --- change attributes of a logical volume
lvchange(8): lvchange allows you to change the attributes of a logical volume including making them known to the kernel ready for use. lvm(8), lvmetad(8), lvs(8), lvcreate(8), vgchange(8), lvmcache(7), lvmthin(7), lvm.

lp.4
lp(4): - line printer devices (Ubuntu Linux Manual)
lp(4): The following ioctl(2) calls are supported: int ioctl(int fd, LPTIME, int arg) Sets the amount of time that the driver sleeps before rechecking the printer when the printer's buffer appears to be filled to arg.

ecm.1
ecm(1): - integer factorization using ECM, P-1 or P+1
ecm(1): ecm is an integer factoring program using the Elliptic Curve Method (ECM), the P-1 method, or the P+1 method. The following sections describe parameters relevant to these algorithms.

gtranslator.1
gtranslator(1): gtranslator -- a comfortable gettext po file editor with many bells
gtranslator(1): gtranslator is a comfortable gettext po file editor with many features like special char featured editing, plural forms view, div. charset support, comfortable prefs, list view of messages, regular expression based search function,

dateutils.ddiff.1
dateutils.ddiff(1): - Compute duration from DATE/TIME (the reference date/time) to
dateutils.ddiff(1): Compute duration from DATE/TIME (the reference date/time) to the other DATE/TIMEs given and print the result as duration. If the other DATE/TIMEs are omitted read them from stdin.

popauth.1
popauth(1): - manage pop3 authentication database (Ubuntu)
popauth(1): GNU popauth -- manage pop3 authentication database Actions are: -a, --add add user -c, --create create the DBM from a plaintext file -d, --delete delete user's record -l, --list list the contents of DBM file -m, --modify modify user's

rtax.1
rtax(1): - Rapid and accurate taxonomic classification of short paired-end sequence
rtax(1): rtax [OPTION]... This manual page was written by Simon Kainz <simon@familiekainz.at> for the rtax package. Rtax was written by David A. W. Soergel <soergel@cs.umass.edu>.

sane-epson.5
sane-epson(5): - SANE backend for EPSON scanners (Ubuntu)
sane-epson(5): The sane-epson library implements a SANE (Scanner Access Now Easy) backend that provides access to Epson flatbed scanners. Some functions of this backend should be considered beta-quality software! Most functions have been stable for a long

v.to.rast.1grass
v.to.rast(1grass): - Converts (rasterize) a vector map into a raster map.
v.to.rast(1grass): v.to.rast transforms GRASS vector map layers into GRASS raster map layer format. Optionally, attributes can be converted to raster category labels. db.describe, v.

g.mapset.1grass
g.mapset(1grass): - Changes/reports current mapset.
g.mapset(1grass): g.mapset changes the current working MAPSET, LOCATION, or GISDBASE. This is a fairly radical maneuver to run mid-session, take care when running the GUI at the same time.

flightcrew-cli.1
flightcrew-cli(1): - epub validator; command line frontend
flightcrew-cli(1): FlightCrew is a epub validator. Allowed options: --help produce help message --version show the program version --input-file arg input file flightcrew-gui(1)

cal.1posix
cal(1posix): cal --- print a calendar (Ubuntu Linux)
cal(1posix): None. The Base Definitions volume of POSIX.12008, Chapter 8, Environment Variables COPYRIGHT Portions of this text are reprinted and reproduced in electronic form from IEEE Std 1003.

spline.1
spline(1): - interpolate datasets using splines under tension
spline(1): spline reads datasets from standard input or from one or more files, and fits a smooth curve (a "spline") through each dataset. An interpolated version of each dataset, consisting of points from the smooth curve, is written to standard

cuffdiff.1
cuffdiff(1): - component of cufflinks suite (Ubuntu)
cuffdiff(1): cuffdiff v2.2.1 () ----------------------------- Supply replicate SAMs as comma separated lists for each condition: sample1_rep1.sam,sample1_rep2.sam,...sample1_repM.

hexer.1
hexer(1): - binary file editor (Ubuntu Linux Manual)
hexer(1): hexer is a multi-buffer editor for viewing and manipulating binary files. It can't (shouldn't) be used for editing block devices, because it tries to load the whole file into a buffer (it should work for diskettes).

errno.2freebsd
errno(2freebsd): intro --- introduction to system calls and error numbers
errno(2freebsd): This section provides an overview of the system calls, their error returns, and other common definitions and concepts. intro(3), perror(3) #include <errno.

bowtie2-align-s.1
bowtie2-align-s(1): - ultrafast and memory-efficient backend tool for aligning
bowtie2-align-s(1): Bowtie 2 version 2.2.9 by Ben Langmead (langmea@cs.jhu.edu, www.cs.jhu.edu/~langmea) USAGE bowtie2-align [options]* -x <bt2-idx> {-1 <m1> -2 <m2> | -U <r>} [-S <sam>] <bt2-idx> Index filename prefix

sunclock.1
sunclock(1): - a fancy clock for the X Window system, providing local time (legal
sunclock(1): sunclock is an X11 application that displays a map of the Earth and shows the illuminated portion of the globe. In addition to providing local time for the default timezone, it also displays GMT time, legal and solar time of major cities,

log2gpx.1
log2gpx(1): - Convert Dire Wolf log files to GPX format.
log2gpx(1): log2gpx converts Dire Wolf log files to the GPX format used by many mapping applications. Stationary entities are converted to waypoints. Moving entities are converted to tracks.

cgigetfile.3
cgigetfile(3): - Return information of a CGI file variable
cgigetfile(3): This routine returns a pointer to a datastructure associated with the value of a CGI file variable. The pointer must not be freed. The s_file structure is declared as follows: typedef struct file_s { char *name, *type, *filename, *tmpfile;

rpost.1
rpost(1): - post an article to an NNTP news server
rpost(1): Rpost will post one or more articles, specified by hostname. If hostname is not specified, rpost will use the environment variable NNTPSERVER. The hostname may optionally include the port number, in the form Host:Port If this form is used,

vim-registry.5
vim-registry(5): - syntax for vim-addons registry files
vim-registry(5): A registry file is a multi-document YAML file (i.e. it can be composed by several different YAML documents separated by "---" lines). Each YAML document represents a registry entry, that is the information describing a single addon.

tic.1
tic(1): - the terminfo entry-description compiler (Ubuntu)
tic(1): The tic command translates a terminfo file from source format into compiled format. The compiled format is necessary for use with the library routines in ncurses(3NCURSES).

gap4.1
gap4(1): - Genome Assembly Program (part of staden package)
gap4(1): Gap4 is a Genome Assembly Program. The program contains all the tools that would be expected from an assembly program plus many unique features and a very easily used interface. The original version was described in Bonfield,J.K., Smith,K.F.

fenv.h.7posix
fenv.h(7posix): fenv.h --- floating-point environment
fenv.h(7posix): The functionality described on this reference page is aligned with the ISO C standard. Any conflict between the requirements described here and the ISO C standard is unintentional. This volume of POSIX.12008 defers to the ISO C standard.

woo-py3.1
woo-py3(1): - manual page for ver. 1.0-1 (openmp,opengl,gts,vtk,qt4)
woo-py3(1): usage: woo [-h] [--version] [-j THREADS] [--cores CORES] [--cl-dev CLDEV] [-n] [-D] [--quirks QUIRKS] [--flavor FLAVOR] [--batch-table BATCHTABLE] [--batch-line BATCHLINE] [--batch-results BATCHRESULTS] [-c COMMANDS] [-e EXPR] [--paused]

annotationviewer.1
annotationviewer(1): - tool for viewing analysis results that have been saved
annotationviewer(1): This manual page documents briefly the annotationViewer and bar commands. This manual page was written for the Debian(TM) distribution because the original program does not have a manual page.

htmlcopy.1p
htmlcopy(1p): htmlcopy -- Copy a HTML file without breaking links.
htmlcopy(1p): htmlcopy a source HTML file into DESTINATION. If the HTML file have links to images, other HTML files, javascripts and cascading style sheets, htmlcopy changing link path in the HTML file to keep the link destination.

exstream.3alleg4
exstream(3alleg4): - Playing audio streams. Allegro game programming library.
exstream(3alleg4): This program shows how to use the audio stream functions to transfer large blocks of sample data to the sound card. In this case, the sample data is generated during runtime, and the resulting sound reminds of a car engine when you are

col.1
col(1): col --- filter reverse line feeds from input
col(1): The col utility filters out reverse (and half reverse) line feeds so that the output is in the correct order with only forward and half forward line feeds, and replaces white-space characters with tabs where possible.

l64a.3posix
l64a(3posix): l64a --- convert a 32-bit integer to a radix-64 ASCII string
l64a(3posix): Refer to a64l(). COPYRIGHT Portions of this text are reprinted and reproduced in electronic form from IEEE Std 1003.1, 2013 Edition, Standard for Information Technology -- Portable Operating System Interface (POSIX), The Open Group Base

gfdf.1
gfdf(1): - display disk free space of Gfarm file system
gfdf(1): gfdf displays disk usage and free space of Gfarm file system. gfhost(1), gfarm2.conf(5) gfdf [options] gfdf - display disk free space of Gfarm file system

license.1
license(1): - program to specify and modify media file licenses
license(1): The liblicense package provides a license command to allow simple command-line examination and manipulation of license information embedded in media files. The default action is to show the default license as configured in $HOME/.license.

tua.8l
tua(8l): - The Uucp Analyzer - (Ubuntu Linux Manual)
tua(8l): The purpose of the TUA utility is to produce a readable and complete analysis of the HoneyDanBer UUCP connections. This manual page describes the TUA command line options and shortly explains its output.

mkdfa.1
mkdfa(1): - grammar compiler - (Ubuntu Linux Manual)
mkdfa(1): mkdfa compiles the Julian format grammar (.grammar and .voca) to Julian native formats (.dfa and .dict). In addition, ".term" will be also generated that stores correspondence of category ID used in the output files to the source category

unistd.h.7posix
unistd.h(7posix): unistd.h --- standard symbolic constants and types
unistd.h(7posix): The <unistd.h> header defines miscellaneous symbolic constants and types, and declares miscellaneous functions. The actual values of the constants are unspecified except as shown. The contents of this header are shown below.

systemd-hybrid-sleep.service.8
systemd-hybrid-sleep.service(8): - System sleep state logic
systemd-hybrid-sleep.service(8): systemd-suspend.service is a system service that is pulled in by suspend.target and is responsible for the actual system suspend. Similarly, systemd-hibernate.service is pulled in by hibernate.target to execute the actual hibernation.

freedv.1
freedv(1): - Digital Voice for HF (Ubuntu Linux Manual)
freedv(1): FreeDV is a GUI application that allows any SSB radio to be used for low bit rate digital voice. Speech is compressed down to 1400 bit/s then modulated onto a 1100 Hz wide QPSK signal which is sent to the Mic input of a SSB radio.

eulb-create-tags.1
eulb-create-tags(1): - Add one or more tags to a load balancer
eulb-create-tags(1): Add one or more tags to a load balancer positional arguments: ELB name of the load balancer to tag (required) optional arguments: -t KEY=VALUE, --tag KEY=VALUE key and value of each tag to add (required) -U URL, --url URL load balancing

classdiagram.3clc
classdiagram(3clc): - OpenCL UML Class Diagram (Ubuntu)
classdiagram(3clc): The diagram above represents the OpenCL specification as a class diagram using the Unified Modeling Language* (UML) notation. The diagram shows both nodes and edges which are classes and their relationships.

rasgetpal.1ncarg
rasgetpal(1ncarg): - extract the color palette of a rasterfile and write it to
rasgetpal(1ncarg): Given srcfile and no dstfile, rasgetpal will extract the color palette from srcfile and print it in textual form to standard output. Given srcfile and dstfile, rasgetpal will extract the color palette from srcfile and save it in file

aprx.8
aprx(8): - An APRS iGate application with integrated Digipeater.
aprx(8): The aprx program is a special purpose Ham-radio application supplying infrastructure services for APRS protocol use. A more detailed manual is available at: http://ham.zmailer.org/oh2mqk/aprx/aprx-manual.

wxradiobutton.3erl
wxradiobutton(3erl): - See external documentation: wxRadioButton.
wxradiobutton(3erl): See external documentation: wxRadioButton. This class is derived (and can use functions) from: wxControl wxWindow wxEvtHandler DATA TYPES wxRadioButton(): An object reference, The representation is internal and can be changed without notice.

www.3
www(3): - World Wide Web Package (Ubuntu Linux Manual)
www(3): This package provides a utility functions for the World Wide Web to extract descriptions of or meta information from files, and hyperlink text. SUBROUTINES The following Perl subroutines are defined and available: extract_description( FILE

mxml.3
mxml(3): - Mini-XML API INCLUDE FILE #include <mxml.h>
mxml(3): Mini-XML is a small XML parsing library that you can use to read XML and XML-like data files in your application without requiring large non-standard libraries. Mini-XML only requires an ANSI C compatible compiler (GCC works, as do most

gwama.1
gwama(1): - Genome-Wide Association Meta Analysis (Ubuntu)
gwama(1): GWAMA (Genome-Wide Association Meta Analysis) software performs meta- analysis of the results of GWA studies of binary or quantitative phenotypes. Fixed- and random-effect meta-analyses are performed for both directly genotyped and imputed

nice.1
nice(1): - run a program with modified scheduling priority
nice(1): Run COMMAND with an adjusted niceness, which affects process scheduling. With no COMMAND, print the current niceness. Niceness values range from -20 (most favorable to the process) to 19 (least favorable to the process).

r.support.1grass
r.support(1grass): - Allows creation and/or modification of raster map layer support
r.support(1grass): r.support allows the user to create and/or edit raster map support information. Editing of raster map color tables, category labels, header, history, and title is supported. Category labels can also be copied from another raster map.

sisu.1
sisu(1): - documents: markup, structuring, publishing in multiple standard formats,
sisu(1): sisu_webrick is part of SiSU (man sisu) sisu_webrick starts Ruby SiSU output is written, providing a list of these directories (assuming SiSU is in use and they exist).

indexmaker.1
indexmaker(1): - Creates index files for mrtg web sites (mrtg-2.17.4)
indexmaker(1): Indexmaker can create web pages which display the status of an array of mrtg interface status pages. --output filename set output filename (default: stdout) --filter (title|pagetop|name)(=~|!~)regexp Several filters may get set.

cdbsplit.6
cdbsplit(6): - program to operate cookie (fortune) database
cdbsplit(6): This manual page documents briefly the cdbsplit command. This manual page was written for the Debian GNU/Linux distribution because the original program does not have a manual page. Instead, it has some plain text documentation, see below.

mono-cil-strip.1
mono-cil-strip(1): Mono CIL strip (Ubuntu Linux Manual)
mono-cil-strip(1): mono-cil-strip is a tool which takes an assembly, and empty its method bodies. This is useful to reduce an assembly size when an assembly has already been compiled using Mono's Ahead Of Time compiler (AOT), where the CIL code is no longer

coffee.1
coffee(1): - interpreter and compiler for the CoffeeScript language
coffee(1): If called without options, `coffee` will run your script. -b, --bare compile without a top-level function wrapper -c, --compile compile to JavaScript and save as .

tos-ident-flags.1
tos-ident-flags(1): - generate compile-time flags identifying a program build
tos-ident-flags(1): tos-ident-flags prints a set of -Dname=value options that identify a build of program-name. It is used to embed build information in a TinyOS executable. Feb 3, 2006 tos-ident-flags(1)

alignmentprojector.1
alignmentprojector(1): - part of mauveAligner package getAlignmen
alignmentprojector(1): These tools belong to the mauveAligner package. They are not explicitly documented but are printing a synopsis line which is repeated here. addUnalignedIntervals <input interval file> <output interval file> alignmentProjector

mkcramfs.8
mkcramfs(8): - make a compressed ROM file system (Ubuntu)
mkcramfs(8): This manual page documents briefly the mkcramfs command. This manual page was written for the Debian GNU/Linux distribution (but may be used by others), because the original program does not have a manual page.

r.li.padsd.1grass
r.li.padsd(1grass): - Calculates standard deviation of patch area a raster map
r.li.padsd(1grass): r.li.padsd calculates the standard deviation of patch area sizes in hectares as: with: * MPS: mean patch area size * ai: area of patch i * Npatch: number of patches This index is calculated using a 4 neighbour algorithm, diagonal cells are

francine.1
francine(1): francine --- highly configureable console login program
francine(1): This manual page documents briefly the francine command. francine is a program with which you can make your console login more funny. You can have ANSI logos for both the login mask and the error screen.

v.db.select.1grass
v.db.select(1grass): - Prints vector map attributes.
v.db.select(1grass): v.db.select prints attributes of a vector map from one or several user selected attribute table columns. db.select v.db.select v.db.select --help v.db.select [-rcvf] map=name [layer=string] [columns=name[,name,...

xapers-adder.1
xapers-adder(1): - "gui" to import individual documents into Xapers database
xapers-adder(1): The specified PDF file is displayed (using xdg-open(1)), then a terminal is opened (x-terminal-emulator(1)) executing the following command: xapers add --file=<file.

perlsource.1
perlsource(1): - A guide to the Perl source tree (Ubuntu)
perlsource(1): This document describes the layout of the Perl source tree. If you're hacking on the Perl core, this will help you find what you're looking for. FINDING YOUR WAY AROUND The Perl source tree is big.

sync-accounts-createuser.8
sync-accounts-createuser(8): - helper/hook program for sync-accounts
sync-accounts-createuser(8): sync-accounts-createuser is invoked by sync-accounts when sync-accounts is creating a local account. It must perform all of the tasks involved with local account creation except for the actual changes to the password, shadow and group

thermachron.3
thermachron(3): - Thermochron temperature logging iButton.
thermachron(3): 1-Wire 1-wire is a wiring protocol and series of devices designed and manufactured by Dallas Semiconductor, Inc. The bus is a low-power low- speed low-connector scheme where the data line can also provide power.

xkbgetnamedgeometry.3
xkbgetnamedgeometry(3): - Loads a keyboard geometry description from this database
xkbgetnamedgeometry(3): It is also possible to load a keyboard geometry by name. The X server maintains a database of keyboard components (see below). XkbGetNamedGeometry can return BadName if the name cannot be found.

acdtable.1e
acdtable(1e): - Generate an HTML table of parameters from an application ACD file
acdtable(1e): acdtable is a command line program from EMBOSS ("the European Molecular Biology Open Software Suite"). It is part of the "Acd,Data retrieval:Tool data" command group(s).

likwid-gentopocfg.1
likwid-gentopocfg(1): - Get system topology and write them to file for faster LIKWID
likwid-gentopocfg(1): likwid-genTopoCfg is a command line application that stores the system's CPU and NUMA topology to file. LIKWID applications use this file to read in the topology fast instead of re-gathering all values.

initctl.8
initctl(8): - init daemon control tool (Ubuntu Linux)
initctl(8): initctl allows a system administrator to communicate and interact with the Upstart init(8) daemon. If D-Bus has been configured to allow non-privileged users to invoke all Upstart D-Bus methods, this command is also able to manage user jobs.

ample.html.5
ample.html(5): - html template for Ample - (Ubuntu)
ample.html(5): This file, by default /etc/ample.html, is read by Ample at startup and used as a base for it's HTML pages. These pages are rendered whenever a webbrowser connects and requests a list of available songs and directories (typically done by

mc-package.1
mc-package(1): - installs, uninstalls and query Operating System packages.
mc-package(1): mc-package installs, uninstalls and query Operating System packages. Usage: mc-package [options] action package --np, --no-progress Do not show the progress bar -1, --one Send request to only one discovered nodes --limit-nodes, --ln [COUNT]

jasper.1
jasper(1): - File format converter specialized in JPEG-2000 encoding
jasper(1): The jasper command converts to and from JPEG-2000 files. Please use the --help command line switch and the JasPer Software Reference Manual for more information.

create-munge-key.8
create-munge-key(8): - Create munge key (Ubuntu Linux)
create-munge-key(8): The create-munge-key script creates a cryptographic key for munge(8) authentication service remunge(1), unmunge(1), munge(3), munge_ctx(3), munge_enum(3), munge(7), munged(8). http://munge.googlecode.

dsa.3ssl
dsa(3ssl): - Digital Signature Algorithm - (Ubuntu)
dsa(3ssl): These functions implement the Digital Signature Algorithm (DSA). The generation of shared DSA parameters is described in DSA_generate_parameters(3); DSA_generate_key(3) describes how to generate a signature key.

storebackupmount.1
storebackupmount(1): - runs storeBackup backing up to an nfs mount
storebackupmount(1): This script does the following: - checks an nfs server with ping - mounts that server via a list of mount points - starts storeBackup (with a config file) - umounts that server

d.rast.num.1grass
d.rast.num(1grass): - Overlays cell category values on a raster map displayed in the
d.rast.num(1grass): d.rast.num overlays cell category values onto a raster map layer displayed on the user's graphics monitor. Category values will be displayed in the text color given and scaled to fit within a single cell.

ddtc.1
ddtc(1): - ddts client tool to help translators and reviewers.
ddtc(1): This script helps both translators and reviewers with parsing mails from the ddts, splitting them into individual package files, sending reviews and patching buggy translations.